Contains 3 Avalon4.1 – 1.3T Machines, with accessories such as controller needed for running. Easily setup a mining cluster with hash rate up to 4.2T. All you need for mining is preparing some power units.
You can also manage 13 clusters by connecting controllers to USB HUB, with hash rate up to 152T.
This product is in stock. It can be delivered within 48 hours after payment confirmation except for holidays.
This product contains: Avalon4.1 – 1.3T Machine * 3, TP-Link TL-WR703N * 1, 4PIN Cable * 3, Avalon USB Converter * 2, Micro USB Cable * 1, weight: 24KG.
SINGLE MINER PARAMETERS:
990W (measure on 12V port of the device)
1100W (on the wall, with assumption of 90% power conversion ratio)
Power per hash:
270J/THash (device only)
295J/THash (on the wall, with assumption of 90% power conversion
Support automatically optimize frequency, no need to overclock manually.
PSU ouput pin:
4x6PIN PCIe power connector. *All must be connected.*
Minimum 1100W output, recommend to use high quality PSU for server
with more than 1200W output and high quality power cable.
Input voltage no lower than 11.7V and no higher than 12.2V (numbers
take from the controller)
Lower voltage leads to lower hashrate and higher voltage leads to
possible device burning down.
NOTICE: Poor quality cable may result in low voltage.
Current: between 1.6A and 2.8A.
Minimum RPM: 3800.
*NOTICE* If the fan is broken or the fan’s RPM cannot be measure,
the device will not start.
Raspberry Pi (version B or B+)
Raspberrt Pi 2 is not supported yet.
Each RPi can control approximate 60 devices.
Each AUC can connect up to 6 devices.